Download PocketITP 1.2
PocketITP 1.2 Download - Other Processors

Previous generations of PocketPCs made use of several different microprocessors and hence required different versions of software to opperate properly. If you know which processor your PDA is equipped with you can download the versions for these legacy processors. If you are using a modern PocketPC it is likely using the ARM microprocessor which you can download here or on the previous download page. If you are using an older PocketPC and don't know which microprocessor your device is using, please skip ahead to the tables of common models to figure that out.

Once you have downloaded PocketITP, it is recommended that you register with us to receive notifications of any updates. You will be asked to do this during the installation process, however you may also do so right now as well. If you have registered for previous versions, there is no need to do so again.

Table of Common PocketPCs
Use this table to look up the microprocessor contained in the model of PocketPC that you are using. Once you figure out the processor you can then download the appropriate version and enjoy our software!

SeriesBinaryMicroprocessorCompact Framework
HP/Compaq
HP iPaq 5500-seriesARMIntel XScale PXA255 400MHzYes
Compaq iPaq 5400-seriesARMIntel XScale PXA250 400MHz*
HP iPaq 5100-seriesARMIntel XScale PXA255 400MHzYes
HP iPaq 4000-seriesARMIntel XScale PXA255 400MHzYes
Compaq iPaq 3900-seriesARMIntel XScale PXA250 400MHzNo
Compaq iPaq 3800-seriesARMIntel StrongARM SA-1110 206MHzNo
Compaq iPaq 3700-seriesARMIntel StrongARM SA-1110 206MHzNo
Compaq iPaq 3600-seriesARMIntel StrongARM SA-1110 206MHzNo
Compaq iPaq 3100-seriesARMIntel StrongARM SA-1110 206MHzNo
HP iPaq 2200-seriesARMIntel XScale PXA255 400MHzYes
HP iPaq 1900-seriesARM or ARMv4Samsung S3C2410 203MHz*
Dell
Axim X30ARMIntel XScale PXA270 312-624MHzYes
Axim X5ARMIntel XScale PXA255 300-400MHzYes
Axim X3ARMIntel XScale PXA263 300-400MHz*
Toshiba/Audiovox
e800-seriesARMIntel XScale PXA264 400MHzYes
e750-seriesARMIntel XScale PXA255 400MHz*
e570/MaestroARMIntel StrongARM SA-1110 206 MHzNo
e550GARMIntel XScale PXA250 400MHzNo
e400-seriesARMIntel XScale PXA261 300MHzYes
e350-seriesARMIntel XScale PXA255 300MHzNo
*This PDA can run both PocketPC 2002 or Windows Mobile 2003, the later contains the .NET Compact Framework whereas the former does not. Please check which version of the OS you are currently running and determine if it contains the framework.

This product is offered as freeware, however if it helps you to make any money please consider making a contribution to assist in future development. Any contributions allow me to spend more time and resources improving the product for later versions. Thanks again to all who have contributed in the past!

This software is a copyrighted work and as such is protected by Canadian copyright law. Please read our licence agreement for more information.

 

Products Services
Support
News
Company
Licence
PocketITP is offered as freeware and can be freely downloaded. Please see the licence agreement for more details.

Downloads:
-Modern PDAs CAB
-MIPS-Based CAB
-SH3-Based CAB
-X86-Based CAB
-ARMv4-Based CAB
-Manual PDF

System Requirements:
-.NET CF 1.0
-788KB of storage space
-1.5MB of free RAM